Probor 50 Cartridge

Price includes Delivery

ProBor 50 is a ready-for-use wood preservative paste based on boron, a naturally occurring mineral with a long history of use. It is supplied in a 310ml cartridge for use with a standard mastic gun. ProBor 50 is designed to be injected into timber or masonry. It can also be applied to the surface of timber, although it should be noted that a white deposit will be left.
ProBor 50 is commonly used as a wood preservative when treating large dimension timbers. It is injected into timber via pre-drilled holes, thus ensuring complete distribution of the active ingredient deep within the wood. In general 10mm holes spaced no more than 150mm apart are recommended. The number of holes should be adjusted to give a product loading of 5.9 litres per cubic metre.
Other common areas of application include the treatment of joist ends and wooden window frames.
ProBor 50 is ideal for use as a masonry sterilant. Because of its highly concentrated formulation high levels of active ingredient can be injected into masonry without introducing large volumes of water. This is of enormous benefit when treating dry rot.

• Triple Purpose
Approved for use as a woodworm treatment, dry/wet rot treatment, and as a masonry sterilant.
• Excellent Penetration
High level of active ingredient, gel formulation, and boron active ingredient combine to provide excellent penetration into timber and masonry.
• Replaces Boron Rods
Better diffusion into timber and masonry.
• Low Odour Formulation
Fewer complaints.
• High Strength
Highest strength formulation in the ProBor range.
ProBor 50 replaces dated boron rod technology. Diffusion of ProBor 50 starts well below the 18-22% moisture level where wood becomes suscepible to dry rot. Boron rods do not start to diffuse until a moisture content of more than 30% is reached.

Buy More, Save More!

5+ Cartriges - £12.50 each inc. Delivery